 |
 |
|
|||||||||
 |
|||||||||||
|
|
|
|
|
|
|
|
|
|||
Brookwoods Industrial Estate
Holywell Green Halifax
West Yorkshire
HX4 9BH England uk
sales@pennineuk.com
Com Reg No 6913788
VAT No GB 973599456
The TNC 320 is a compact but versatile contouring control for four (optionally five) controlled axes. Thanks to its flexible operating concept workshop-oriented programmability with HEIDENHAIN conversational programming or external programming and its scope of features, it is especially suited for use on universal milling, drilling and boring machines for
We are heidenhain approved TNC retrofitters for all TNC Controls including TNC320 controlsSpecifications: TNC 320 Components Main computer with TNC control panel and integrated 15.1-inch TFT color flat-panel display Monitor with soft keys Operating system HEROS real-time operating system for machine control Memory 10 MB on Compact Flash memory card (CFR) Input resolution and display step For linear axes: to 0.1 µm
For angular axes: to 0.0001° Input range Maximum 99999.999 mm (3937 inches) or 99999.999° Interpolation Linear in 4 axes
Circular in 2 axes
Helical interpolation: Superimposition of circular and straight paths Block processing time 6 ms (3-D straight line without radius compensation) Axis control Position loop resolution: signal period of the position encoder/1024
Position controller cycle time: 3 ms Range of traverse Maximum 100 m (3937 inches) Spindle speed Maximum 100000 rpm (analog speed command signal Error compensation Linear and nonlinear axis error, backlash, reversal spikes during circular movements, thermal expansion
Stick-slip friction Data interfaces RS-232-C/V.24 max. 115 kbps
Extended data interface with LSV2 protocol for remote operation of the TNC 320 over the data
interface with the HEIDENHAIN software TNCremoNT
100BaseT Fast Ethernet interface
2 x USB 1.1 Ambient temperature Operation: 0 °C to +45 °C (32 °F to 113 °F)
Storage: –35 °C to +65 °C (–31 °F to 149 °F)