| Specifications: iTNC 530 |
| Components | Standard:Main computer with one processor
Option Windows 2000:Main computer with two processors
Controller unit
Keyboard
TFT color flat-panel display with soft keys, 15.1"
| | Operating system | Standard: HEROS real-time operating system for machine control
Option Windows 2000: Windows 2000 PC operating system as user interface | | Memory | RAM memory:
Standard: 128 MB for control applications
Option Windows 2000: 256 MB for Windows applications
Hard disk with at least 13 GB memory
| | Input resolution and display step | Linear axes: to 0.1 µm
Angle axes: to 0.0001° | | Input range | Maximum 99999.999 mm (3937 inches) or 99999.999° | | Interpolation | Linear in 4 axes
Software option 2:Linear in 5 axes (export permit required)
Circular In 2 axes
Software option 1:Circle: in 3 axes with tilted working plane
Helical: superimposition of circular and straight paths
Software-Option 2:Spline: execution of splines (3rd degree polynomial) | | Block processing time | 3.6 ms (3-D straight line without radius compensation)
Software option 2:0.5 ms | | Axis control | Position loop resolution: signal period of the position encoder/1024
Position controller cycle time: 1.8 ms
Speed controller cycle time: 600 µs
Current controller cycle time: min. 100 µs | | Range of traverse | Maximum 100 m (3937 in.) | | Spindle speed | Maximum 40 000 rpm (with 2 pole pairs) | | Error compensation | Linear and nonlinear axis error, backlash, reversal spikes during circular movements, thermal expansion
Stick-slip friction | | Data interfaces | One each RS-232-C / V.24 and RS-422 / V.11; max. 115 kbps
Expanded data interface with LSV2 protocol for remote operation of the iTNC 530 through the data interface with the HEIDENHAIN software TNCremoNT
Fast Ethernet interface 100BaseT | | Ambient temperature | Operation: 0 °C to +45 °C
Storage: –30 °C to +70 °C |
|
We are heidenhain approved TNC retrofitters for all TNC Controls including TNC530 controls
Back To Heidenhain Controls Page