| Specifications: TNC 320 |
| Components | Main computer with TNC control panel and integrated 15.1-inch TFT color flat-panel display Monitor with soft keys | | Operating system | HEROS real-time operating system for machine control | | Memory | 10 MB on Compact Flash memory card (CFR) | | Input resolution and display step | For linear axes: to 0.1 µm
For angular axes: to 0.0001° | | Input range | Maximum 99999.999 mm (3937 inches) or 99999.999° | | Interpolation | Linear in 4 axes
Circular in 2 axes
Helical interpolation: Superimposition of circular and straight paths | | Block processing time | 6 ms (3-D straight line without radius compensation) | | Axis control | Position loop resolution: signal period of the position encoder/1024
Position controller cycle time: 3 ms | | Range of traverse | Maximum 100 m (3937 inches) | | Spindle speed | Maximum 100000 rpm (analog speed command signal | | Error compensation | Linear and nonlinear axis error, backlash, reversal spikes during circular movements, thermal expansion
Stick-slip friction | | Data interfaces | RS-232-C/V.24 max. 115 kbps
Extended data interface with LSV2 protocol for remote operation of the TNC 320 over the data
interface with the HEIDENHAIN software TNCremoNT
100BaseT Fast Ethernet interface
2 x USB 1.1 | | Ambient temperature | Operation: 0 °C to +45 °C (32 °F to 113 °F)
Storage: –35 °C to +65 °C (–31 °F to 149 °F) |
|
|
We are heidenhain approved TNC retrofitters for all TNC Controls including TNC320 controls
Back To Heidenhain Controls Page