Allan Robertson Baker Oil tools (UK)."I would like to thank you and your team for the excellent work done on refurbishing our Yamazaki machine, as you may be aware this machine is vital to our operation, and its outage was a big concern for our production team. I was delighted you managed to carry out the work within budget and within the estimated time, the machine is now back into full" production.

Pinco USA You helped us greatly. You sent a very good technician. I believe they are in the final stages and are now training to use the new controls.

Alistair McIsaac of Weir Pumps says ...
"Pennine retrofit has been very successful and has achieved the objective of significantly reducing machining times and also producing a capability for contour machining of large component parts which previously had to be sub-contracted".

Geoff Dean of F Dean & Sons Ltd ...
"We had previously visited Pennine's facilities and had seen similar conversions taking place. We now have an up-to-date accurate machine at a fraction of the cost of buying new. It has never stopped working since delivery here in February "

Les Lay of Boxford & Wheatley ...
"We are very pleased with the retrofit it has given a new lease of life to a machine that is superior to many modern units, yet at a much lower cost than new. Programming is much easier than before and the control system is far more reliable. We're machining shafts and discs and getting the results we hoped for, in fact we are considering asking Pennine Machine Tools to repeat the job on another VDF machine."

Dave Smith at MB Aerospace stated ...
"With the quick and professional response from Pennine Machine Tools MB Aerospace was able to keep production on target with the minimum of disruption".

John, Graham, Glynn of Design and Manufacturing Inc ...
Neil and Angela, all of us in the Maintenance Department at Design and Manufacturing would like to say thank you for sending us the Siemens Spindle Card and also for the web site (support.automation.siemens).This information helped us out tremendously. maintenance department

Jeffrey Kwok Mano Manufacturing ...
Once again, thank you for your help regarding our previous Fanuc main board and servo drive problems. All the machines are running nicely now.